* Nova Coat is most recommendable finish coat for the system. It is designed especially for the system originally. Secondary, thick finish is suitable for the system that is Decrea stone coating and Bassara thick finish. As Mugen and Cerart finish is thin, it must be carefully to provide a completely flat surface before its application.

The mixture of Nova Mortar is used as a key mortar between concrete surface and Nova insulation Panel, which has a secure bonding adhesion.		Along with datum lines for the surface level, Nova Insulation Panel with key mortars is installed cautiously.		The mixture of Nova Mortar is applied with steel trowel as a surface treatment and a bed for Nova RFM mesh.
When the applied Nova Mortar Mixture is wet, Nova RFM Mesh* is inserted into the wet layer of Nova Mortar with trowel.		Draw the surface of Nova RFM Mesh with trowel. Then, Nova Mortar might cover the RFM Mesh evenly. If Nova RFM Mesh is still appeared, add more mixture of Nova Mortar.		Thickness of Nova RFM Mesh can lead to make even thickness with the mixture of Nova Mortar. Try to achieve flat surface as much as possible without the appearance of Nova RFM Mesh.

* Nova RFM Mesh - There are two kinds of Nova RFM Mesh. One is Nova Single RFM Mesh for all surface of the system, and another one is Nova Double Mesh especially for ground floor which gives the system more impact resistance. If more impact resistance is required for other places, it can be available to use.